集成电路 ACS712ELCTR-20A-T 热卖库存

Features and Benefits ? Low-noise analog signal path ? Device bandwidth is set via the new FILTER pin ? 5 μs output rise time in response to step input current ? 50 kHz bandwidth ? Total output error 1.5% at TA= 25°C, and 4% at –40°C to 85°C ? Small footprint, low-profile SOIC8 package ? 1.2 m? internal conductor resistance ? 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8 ? 5.0 V, single supply operation ? 66 to 185 mV/A output sensitivity ? Output voltage proportional to AC or DC currents ? Factory-trimmed for accuracy ? Extremely stable output offset voltage ? Nearly zero magnetic hysteresis ? Ratiometric output from supply voltage

Description The Allegro? ACS712 provides economical and precise solutions for AC or DC current sensing in industrial, automotive, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection. The device consists of a precise, low-offset, linear Hall sensor circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy after packaging. The output of the device has a positive slope (>VIOUT(Q)) when an increasing current flows through the primary copper conduction path (from pins 1 and 2, to pins 3 and 4), which is the path used for current sensing. The internal resistance of this conductive path is 1.2 m? typical, providing low power

专业代理，全新到货，大量现货欢迎询问！！！ 质优价廉，品质保证！ 批号：15+ 专业代理全线产品，优势的进货渠道，专业的销售团队， 一手货源，全国最低价供应！ 为您提供专业、快捷、可靠的产品 深圳德田科技有限公司 Shenzhen Spring Technology Co.,Ltd 地址：深圳市福田区振华路122号海外装饰大厦A座211室 Shenzhen futian district zhenhua road 122 overseas decoration building, room 211, BLOCK A, 518031 成先生 电话（Tel）：(+86-755) 8352 1389 传真（Fax）：(+86-755) 8350 2530 邮箱: 2433941092@QQ.com 网址：www.dt-ic.com