DESCRIPTION The Texas Instruments MSP430 family of ultralow-power mICrocontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlLED oscillator (DCO) allows wake-up from low-power modes to active mode in less than 5 μs. The MSP430F5529, MSP430F5527, MSP430F5525, and MSP430F5521 are microcontroller configurations with integrated USB and PHY supporting USB 2.0, four 16-bit timers, a high-performance 12-bit analog-to-digital converter (ADC), two universal serial communication interfaces (USCI), hardware multiplier, DMA, real-time clock module with alarm capabilities, and 63 I/O pins. The MSP430F5528, MSP430F5526, MSP430F5524, and MSP430F5522 include all of these peripherals but have 47 I/O pins. The MSP430F5519, MSP430F5517, and MSP430F5515 are microcontroller configurations with integrated USB and PHY supporting USB 2.0, four 16-bit timers, two universal serial communication interfaces (USCI), hardware multiplier, DMA, real time clock module with alarm capabilities, and 63 I/O pins. The MSP430F5514 and MSP430FF5513 include all of these peripherals but have 47 I/O pins. Typical applications include analog and digital sensor systems, data loggers, etc. that require connectivity to various USB hosts.
MSP430F5528IZQER.jpg)
FEATURES ? Low Supply-Voltage Range: 1.8 V to 3.6 V ? 16-Bit Timer TA0, Timer_A With Five ? Ultralow Power Consumption Capture/Compare Registers – Active Mode (AM): ? 16-Bit Timer TA1, Timer_A With Three All System Clocks Active Capture/Compare Registers 290 μA/MHz at 8 MHz, 3.0 V, Flash Program ? 16-Bit Timer TA2, Timer_A With Three Execution (Typical) Capture/Compare Registers 150 μA/MHz at 8 MHz, 3.0 V, RAM Program ? 16-Bit Timer TB0, Timer_B With Seven Execution (Typical) Capture/Compare Shadow Registers – Standby Mode (LPM3): ? Two Universal Serial Communication Real Time Clock With Crystal , Watchdog, Interfaces and Supply Supervisor Operational, Full – USCI_A0 and USCI_A1 Each Supporting RAM Retention, Fast Wake-Up: – Enhanced UART supporting 1.9 μA at 2.2 V, 2.1 μA at 3.0 V (Typical) Auto-Baudrate Detection Low-Power Oscillator (VLO), General-Purpose Counter, Watchdog, and – IrDA Encoder and Decoder Supply Supervisor Operational, Full RAM – Synchronous SPI Retention, Fast Wake-Up: – USCI_B0 and USCI_B1 Each Supporting 1.4 μA at 3.0 V (Typical) – I 2C TM – Off Mode (LPM4): – Synchronous SPI Full RAM Retention, Supply Supervisor ? Full-Speed Universal Serial Bus (USB) Operational, Fast Wake-Up: 1.1 μA at 3.0 V (Typical) – Integrated USB-PHY – Shutdown Mode (LPM4.5): – Integrated 3.3-V/1.8-V USB Power System 0.18 μA at 3.0 V (Typical) – Integrated USB-PLL ? Wake-Up From Standby Mode in Less Than – Eight Input, Eight Output Endpoints 5 μs ? 12-Bit Analog-to-Digital (A/D) Converter ? 16-Bit RISC Architecture, Extended Memory, (MSP430F552x Only) With Internal Reference, up to 25-MHz System Clock Sample-and-Hold, and Autoscan Feature ? Flexible Power Management System ? Comparator – Fully Integrated LDO With Programmable ? Hardware Multiplier Supporting 32-Bit Regulated Core Supply Voltage Operations – Supply Voltage Supervision, Monitoring, ? Serial Onboard Programming, No External and Brownout Programming Voltage Needed ? Unified Clock System ? Three Channel Internal DMA – FLL Control Loop for Frequency ? Basic Timer With Real-Time Clock Feature Stabilization ? Family Members are Summarized in Table 1 – Low Power/Low Frequency Internal Clock ? For Complete Module Descriptions, See the Source (VLO) MSP430x5xx Family User’s Guide (SLAU208) – Low Frequency Trimmed Internal Reference Source (REFO) – 32-kHz Watch Crystals (XT1) – High-Frequency Crystals up to 32 MHz (XT2)
专业代理,全新到货,大量现货欢迎询问!!! 质优价廉,品质保证! 批号:15+ 专业代理全线产品,优势的进货渠道,专业的销售团队,一手货源,全国最低价供应! 为您提供专业、快捷、可靠的产品 深圳德田科技有限公司 Shenzhen Spring Technology Co.,Ltd 地址:深圳市福田区振华路122号海外装饰大厦A座211室 Shenzhen futian district zhenhua road 122 overseas decoration building, room 211, BLOCK A, 518031 成先生 :136 6268 8167 电话(Tel):(+86-755) 8352 1389 传真(Fax):(+86-755) 8350 2530 邮箱: 2433941092@QQ.com 网址:www.dt-ic.com